MEC - Aerial Work Platforms


2047ES	2647ES	3247ES

Standard Features:

Extra wide platforms provide maximum space for personnel, tools and work materials.
More reach with three platform heights.
Maximum work space.
Higher capacity (up to 1,250 lbs) expands applications and productivity.
Fully proportional drive and lift controls.
Non-skid, steel deck construction.
High torque power package gives extra boost when you need it.
Built strong, works tough with patented PowerLift™ elevating system.
Specially designed hydraulic swivel fittings reduce hydraulic hose failure due to hose binding.
Dedicated compartments protect electrical and hydraulic components.
Roll-out deck.
Sheet loading entrance.

Emergency shut-off at platform and base.
Motion alarm.
Hour meter.
Industrial grade, solid-state battery charger.
Four 6V 220 Amp Hr industrial deep-cycle batteries (245 ah on 3247ES)
Multi-axis tilt sensor.
Automatic pothole protection™.
Non-marking tires.
Multiple disc brakes.
Drive speed interlock.
Lubrication free scissor bearings.
Machine tie downs.
Powder coat finish.
Scissor maintenance lock.
110V power to platform.
Fold-down guardrails.
Fork lift pockets.
Static strap
Lifting lugs.
Absolute best value

Optional Features:
Lanyard attachments (4) Battery charge indicator Audible motion alarm Flashing beacon (continuous) Automotive horn 245 amp-hr deep cycle batteries Removable upper control station	Platform swing gate Air line to platform EE Rating 800 watt AC inverter CSA compliant options 1 or 2 year extended warranty

Detailed Specs 2047ES 2647ES 3247ES

U.S. Metric U.S. Metric U.S. Metric

Height:
Working Height
Platform Height
Stowed Height (top guardrail)
Stowed Height (rails folded)
26 ft
20 ft
84 in
65 in
8.10 m
6.10 m
2.13 m
1.65 m
32 ft
26 ft
89.4 in
71.2 in
9.92 m
7.92 m
2.27 m
1.81 m
38 ft
32 ft
96.5 in
77.5 in
11.75 m
9.75 m
2.45 m
1.97 m

Maximum number of occupants 3 3 3 3 2 2

Capacity:
Lift capacity (evenly distributed)
Roll-Out Deck Capacity
1,250 lbs
250 lbs
567 kg
113 kg
1,000 lbs
250 lbs
454 kg
113 kg
700 lbs
250 lbs
318 kg
113 kg

Platform Dimensions:
Platform Length (extended)
Platform Length (retracted)
Guardrail Height
Toeboard Height
Roll-Out Deck Length
133.5 in
91 in
43.4 in
6 in
42.1 in
3.39 m
2.31 m
1.10 m
15.2 cm
1.07 m
133.5 in
91 in
43.4 in
6 in
42.1 in
3.39 m
2.31 m
1.10 m
15.2 cm
1.07 m
133.5 in
91 in
43.4 in
6 in
42.1 in
3.39 m
2.31 m
1.10 m
15.2 cm
1.07 m

Overall Length 99 in 2.51 m 99 in 2.51 m 99 in 2.51 m

Overall Width 47 in 1.19 m 47 in 1.19 m 47 in 1.19 m

Wheel Base 71 in 1.80 m 71 in 1.80 m 71 in 1.80 m

Wheel Track 41 in 1.04 m 41 in 1.04 m 41 in 1.04 m

Turning Radius:
Inside
Outside
zero
94 in
zero
2.4 m
zero
94 in
zero
2.4 m
zero
94 in
zero
2.4 m

Ground Clearance 3.5 in 8.89 cm 3.5 in 8.89 cm 3.5 in 8.89 cm

Machine Weight (unloaded) (Approx.) 4,450 lbs 2019 kg 5,300 lbs 2404 kg 5,990 lbs 2717 kg

Drive System (Proportional):
Drive Speed (Platform Elevated)
Drive Speed (Platform Lowered)
0.5 mph
2.5 mph
0.8 km/h
4.0 km/h
0.5 mph
2.5 mph
0.8 km/h
4.0 km/h
0.5 mph
2.5 mph
0.8 km/h
4.0 km/h

Lift/Lower Speed (Approx.) 28/35 sec 28/35 sec 30/35 sec 30/35 sec 42/45 sec 42/45 sec

Gradeability 28% 28% 28% 28% 25% 25%

Brakes Dual rear wheel multi-disc

Drive Axle Dual front wheel hydraulic

Controls Proportional drive & lift controls

Ground Pressure/Wheel (Maximum) 180 psi 12.7 kg/cm² 194 psi 13.6 kg/cm² 205 psi 14.4 kg/cm²

Wind Speed (Maximum)
0 mph
0 km/h
0 mph
0 km/h
0 mph
0 km/h

Tire Size-Standard (Solid, non-marking rubber) 16 in D x 5 in W / 40.64 cm D x 12.70 cm W

Tire Pressure Not applicable for foam tires

Wheel Lug Nut Torque 75 - 85 ft. lbs / 102 - 115 Nm

Hydraulic Pressure:
Main System
Lift System
Steer
2750 psi / 190 bar
2500 psi / 172.4 bar
900 psi / 62 bar

Hydraulic Fluid Capacity 4.5 gallons / 17.0 liters

Fuel Capacity n/a

Power System 24 Volt DC

Battery Charger:
Input
Output
110-220 Volt AC, 50/60 Hz, 5.6 Amp
24 Volt DC, 25 Amps Tapering, Timed Shutoff

Batteries Four (4), 6 Volt Deep-Cycle,
220 Amp hours @ 20 hour rating

Electric Motor 2.0 h.p. (1.49 kW); 3000 rpm

Meets requirements of ANSI A92.6-1999 Section 4 & CSA B354.2-01
Specifications subject to change without notice