MEC 2033ES		MEC 2633ES

Detailed Specs	2033ES	2633ES
	Metric	Metric
Height:  Working Height  Platform Height  Stowed Height (top guardrail)  Stowed Height (rails folded)	7.98 m 5.98 m 2.06 m 1.90 m	9.80 m 7.80 m 2.19 m 2.00 m
Maximum Number of Occupants	2	2
Capacity:  Lift capacity (evenly distributed)  Roll-out Deck Assembly	363 kg 113 kg	226 kg 113 kg
Dimensions:  Platform Length (extended)  Platform Length (retracted)  Guardrail Height  Toeboard Height  Roll-out Deck Length	3.38 m 2.31 m 1.10 m 15 cm 1.06 m	3.38 m 2.31 m 1.10 m 15 cm 1.06 m
Overall Length	2.49 m	2.49 m
Overall Width	0.84 m	0.84 m
Wheel Base	1.8 m	1.8 m
Wheel Track	0.70 m	0.70 m
Turning Radius:  Inside  Outside	zero 2.00 m	zero 2.20 m
Ground Clearance	8.9 cm	8.9 cm
Machine Weight (unloaded, approx.)	1737 kg	2105 kg
Drive System (proportional):  Drive Speed (platform elevated)  Drive Speed (platform lowered)	0.8 km/h 4.8 km/h	0.8 km/h 4.8 km/h
Lift/Lower Speed (approx.)	18/35 sec	18/35 sec
Gradeability	30%	28%
Ground Pressure/Wheel (maximum)	8.89 bar	8.89 bar
Wind Speed (maximum)	0 km/h	0 km/h
Tire Size-Standard (solid, non-marking rubber)	40.6cm D x 12.7 cm W
Tire Pressure	Not applicable for foam tires
Wheel Lug Nut Torque	102-115 Nm
Hydraulic Pressure:  Main System  Lift System  Steer	190 bar 166 bar 62 bar
Hydraulic Fluid Capacity	11.36 liters
Fuel Capacity	n/a
Power System	24 volts DC
Battery Charger:  Input  Output	120 volt AC, 60 HZ, 5.6 Amp 24 volt DC, 25 Amps Tapering, Timed Shut-off
Batteries	Four (4) 6V deep cycle; 220 amp hours @ 20 hour rating
Electric Motor	1.49 kW; 3000 rpm
Brakes	Dual rear wheel multi-disc
Drive Axle	Dual front wheel hydraulic

Manufactured to comply with the Machinery Directive 98/37/EC & the EN280:2001. 
Specifications subject to change without notice.